Alka-Products

Tile supports

SpiraPave

SpiraPave is a new generation of tile supports whose individual components can be combined to achieve the desired height.
SpiraPave has a minimum height of 12 mm and is ideal for installations where conventional adjustable tile supports cannot be used because they are too large.
SpiraPave can be combined with a tilt corrector, which is placed either on the head or the base and can correct a tilt between 0 and 5%.

Below are some examples of the possibilities that SpiraPave offers, if you want more technical and product information Then click here.

VersiPave GP

VersiPave GP is a light and durable tile support system made from 100% recycled plastic.
VersiPave GP enables easy placement of tiles on flat roofs, terraces, balconies and other places where drainage, as well as ventilation and clean surfaces are required. Sand and gravel are no longer required.
VersiPave GP consists of a round base piece with four sections. Each quarter has a "SNAP" support leg, which is height-adjustable with 1 mm ribs.
VersiPave GP can be adjusted in height between 25 mm and 35 mm and can be extended to a height of 153 mm using extenders E10 and E30.

Below you can see some examples of the possibilities that VersiPave GP offers, if you want more technical and product information Then click here.

VersiJack pedestal

VersiJack eliminates the need for bedding sand / or of brick or metal piers for installation of raised pavers or decking. It eliminates efflorescence and prevents algae growth on pavers, facilitates rapid surface drainage and easy accessibility to waterproofing membranes and concealed services. It also provides a ventilation break that reduces heat and sound transmission to habitable space below.
Below you can see some examples of the possibilities VersiJack offers, if you want more technical and product information Then click here.

Versipave 4P pedestal with fixed height.

Versipave 4P is a paver support of fixed height of 4 mm. designed for stone or wooden pavers. I helps reduce efflorescence and algae growth
Versipave 4P has an integrated spacer tab which provides regular gap sizes between pavers. The pedestal between sealing and plate is 4 mm thick and 170 mm in diameter and it prevents the violation of the roof membrane.
Versipave 4P can be stacked in order to achieve an effective height of 8 mm. Between or above them can also be rubber pads used - they are 1mm or 2mm thick.
The 12mm high spacer tabs are well suited for panels with low material thickness.
Versipave 4P can be separated into halves or zones in and around corners to provide a flush installation along the walls.
For further technical and product information click here.

Femox pedestal accessories

For all accessories for your Femox pedestal Products click here.